PACCAR Inc. W900, T660, T800, C500, 963 — Sleeper Heater - A/C Controls (option)

HEATING AND AIR CONDITIONING Auto Heat - A/C: Works together with the Temperature Control (3) to maintain the temperature automatically. Temperature Control (3): The sensor is located on the sleeper heater - A/C control panel and mea- sures the sleeper air temperature at the panel. There will be a time delay between Temperature Control adjustment and sleeper air tempera- ture change. Also, be careful of any heat source which could affect the air temperature by the sensor. Avoid hanging items (e.g. shirt, jacket, etc.) which could block the air flow to the sensor. NOTE The temperature for the sleeper is controlled automatically. Heat & A/C Control (2) (Modular): Set the Heat & A/C Control to:

Allows you to select between Heat or A/C . AutoHeat - A/C (for Aerocabs & Studios) 3 Heat: The fan cycles on/off to regulate temperature based on the Temperature Control (3) setting. Heat or A/C (for Modulars) Adjust the Temperature Control and a sensor will then control the sleeper temperature. The Temperature Control is not keyed to specific temperatures. Turning counterclockwise means cooler than it is now. Clockwise means warmer than it is now. Once the desired temperature is reached, the system will maintain it automatically. A/C: A refrigerant solenoid valve cycles open/closed to regulate the temperature based on the Temperature Control (3) setting. 3-20 Y53-1203-1D1 (02/14)