Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE CHECK OF INFLATION PRESSURE OF TIRES AND INFLATION OF THEM WARNING 0.44 (4.5, 63.9) Rear tire 0.40 (4.1, 58.2) NOTICE If the tires are used when the inflation pressure is less than the value given in the table above, the rim may be damaged. Always keep the tire inflation pressure within +0 to +0.03 MPa (0.3 kg/cm 2 , 4.3 PSI) of the value in the table above. PRECAUTIONS WHEN REPLACING TIRE After tightening hub bolts (1) when replacing the tire, travel for 5 to 6 km, tighten the bolts again to settle all the contacting parts. In particular, there are more contacting parts on the rear wheels than on the front wheels, so it will take time for the parts to settle.

For this reason, repeat the tightening process during the first 50 hours after installation. 4 - 35 When inf lating the ti re, check that no one c an enter the area around t he tire, and always use an air chuck with a cli p that can be fixed to the air valve. While inf lating the tir e, check the inflation p ressure occasionally so t hat it will no t rise too hi gh. If the rim is not fitted normally, it may be br oken and scattered while t he tire is inf lated. Accordingly, place a guard around the tire and do n ot work in f ront of the r im but work on the tre ad side of the tire. abnormal fitting of the rim Abnorma l drop of i nflation pressure and im indicate a trouble in the tire or rim.

In this case, be sure to ask a t ire repair sh op for repai r. he specified inflation pressure. flation pressure of the tires just after high-speed work. Be sure t o observe t he specified inflation p Do not a djust the in flation pressure of th work. travel or heavy-load Check Use a tire pressure g auge to measure th e tire inflation pressure before starting operations when the tires are cool. Inflation of t ires inflation pressure properly. Adjust the inflation p When infla ting a tire, use an air chuck w hich can be fixed to the air valve of the tire as sho wn in the figure. Do not work in fro nt of the ri m but work on the tr ead side of the tire.

The prope r inflation pressure is shown b Tire size Inflation pressure [MPa (kg/cm2, P Front tire Center tire 23.5-R25 (standard) 0.44 (4.5, 63.9) 0.44 (4.5, 63.9) 750/65 R25 (30/65 R25) (if equipped) 0.34 (3.5, 49.7) 0.40 (4.1, 58.2)