Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE ADJUST PARKING BRAKE WARNING parking brake switch. (1) and turn 4 - 36 To prevent the parking brake from being aut omatically appl ied during the adjustment operation , raise the brake oil pressure high level and han g a warnin g notice that c an be seen clearly to prevent any oth er person from operating the Never put any oil or grease on the surface of the pad or dis If the parking br ake effect is poor, adjust a he brake oil pressure caut ion lamp is tu rned OFF ccumulator pressure is suf ficiently high) , and then parking brake. he lock portion of parking brake adjustm ent screw it counterclockwise to bring the pad into tight the disc.

he lock portion of parking brake adjustm ent screw it back clockwise 240±15° (2/3 turns). Measure the thic kness of the pad, and if it is less than 1.5 mm (0.06 in), contact your Komatsu distributor to ha ve it replaced . When carrying out the first adjustment a fter replacing the pad, push down the l ock portion of adjustment s crew (1) and t urn it back clockwise 360 ± 15° (1 turn). After adjusting, See "CHECK check the brakin g capacit y of the park ing brake. BRAKING CAPACITY O F PARKING BRAKE (PAGE 4-50)". If the machine moves, contact your Komatsu spection. distributor for in