RT40 Operator’s Manual Saw - 87 Operation p 1. Adjust throttle to low idle. 2. Move attachment speed/direction control to desired speed. SAW WILL TURN. 3. Increase engine speed to full throttle. 4. Slowly lower saw to trench depth. Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. NOTICE: Ensure that stabilizers are in contact with the ground while sawing. Failure to use stabilizers correctly will damage equipment. 5. Raise backfill blade. 6. Release parking brake. 7. Push ground drive control forward to trenching speed. 8. When trench is complete, move ground drive control to neutral and adjust throttle to low idle. 9.
Raise saw and stabilizers. 10. As saw clears top of trench, move attachment speed/direction control to neutral. 11. Drive a short distance away from work site. 12. Shut down tractor. See page 60 for correct shutdown procedures. CMW