hyundai — l4gc

MAIN MOVING SYSTEM 2-35 2) Rotate the crankshaft pulley so as to align it with T mark on the timing belt low cover. 3) Check the valve gap. Intake side IN. 1 IN. 2 Rear side EX. 1 EX. 3 Exhaust side Adjusting valve at no.1 compression dead point L4GC055A 7. Adjust the gap between the intake and exhaust valves. 1) Rotate the crankshaft so as to place the cam lobe on the adjustable valve camshaft upward. Upward Cam lobe L4GC056A