John Deere 450H, 550H, 650H — Drain and Refill Winch Oil and Replace Filter—If Equipped

Maintenance—Every 1000 Hours 3. Remove primary element (B). 4. Remove secondary element (C). 5. Clean air cleaner housing. IMPORTANT: Do not install secondary element backward. T117903B —UN—05NOV98 6. Install new elements. Make sure elements are fully seated into housing. 7. On 450H machines: Install cover with the dust unloader valve in the 5 o'clock position and yellow lever pulled out. While firmly pushing cover onto housing, rotate cover clockwise approximately 25 mm (1 in.) until cover snaps into place. Push the yellow lever in to lock. Hood and Side Shields Removed for Clarity of Photo On 550H and 650H machines: Install cover with the dust unloader valve in the 5 o'clock position.

Latch three latches to secure cover. T117904B —UN—05NOV98 B—Primary Element C—Secondary Element Hood and Side Shields Removed for Clarity of Photo CED,OUO1032,783 -19-22JAN03-2/2 Replace Dust Unloader Valve To remove dust unloader valve, pry collar of unloader valve (1) from tube of air cleaner housing. Install new unloader valve by stretching collar over flange on tube of air cleaner housing. Be sure there are no gaps between valve collar and tube. TX1034224A —UN—08JAN08 Valve should remain closed above 1/3 engine speed. 1— Unloader Valve CED,OUO1032,1158 -19-14JAN08-1/1 3-8-3 070813 PN=111