John Deere 450H, 550H, 650H — Fuse Specifications for ROPS Units (Earlier Machines)

Miscellaneous—Machine Removing Batteries CAUTION: Never check battery charge by placing a metal object across the posts. Use a voltmeter or hydrometer. Always remove grounded battery clamp first and replace it last. TS204 —UN—15APR13 1. Turn battery disconnect switch to “Off”. 2. Remove battery cover. 3. Disconnect negative battery cable(s) first then positive (+) cable(s). 4. Remove nuts to remove hold down frame(s). 5. Lift out battery/batteries. 6. Check cables and clamps for damage and wear. 7. Make certain that the battery/batteries are fully charged. T117482 —UN—20OCT98 8. Set the battery/batteries in the compartment making sure they are level. 9. Install hold down frames. 10.

Connect cables; positive then negative. Dual Battery Option Shown 11. Install battery cover. 12. Turn battery disconnect switch to ON. TX,90,RB83 -19-14JAN08-1/1 4-1-7 070813 PN=123