John Deere 450H, 550H, 650H — Adding Oil to the Roller

Miscellaneous—Machine Track Sag General Information Properly adjusted tracks prolong chain life. To get the maximum life out of track bushings, keep the track sag properly adjusted. Improperly adjusted track wears at a more rapid rate. A tight track causes higher loading which will increase wear on the pins, bushings, links, sprocket and front idler. The graph (A) shows how the loading on the track chain increases significantly when tracks are too tight. Also, a tight track requires more horsepower, increasing fuel consumption and decreasing productivity. T7800AJ —UN—31JUL92 Periodically check track sag. In some applications, tracks may require adjustment several times during a working day.

This is especially true when working in different conditions on the same job site, as moisture content of the soil changes. Track Tension kg (lb) vs. Track Sag mm (in.) Tracks should always be adjusted in the actual operating conditions. If material packs in the undercarriage, the tracks should be adjusted with the material packed in the components. When packing occurs, track sag is taken up and must be loosened to extend wear life. The track spring will recoil and the machine will continue to operate with tight track.

However, continued operation without loosening the tracks will result in excessive pin and bushing wear, sprocket popping, tooth tip wear, and excessive loads on the entire undercarriage and final drive system. With sealed chain, internal pin and bushing wear creates sag which reduces the effects of packing. However, if a sealed chain is too tight, accelerated bushing wear occurs. Lubricated chain is different due to the absence of internal pin and bushing wear. It is absolutely essential to keep sag adjusted to prevent accelerated bushing outside diameter wear. T7800AH —UN—31JUL92 Maintaining track sag is very important regardless of the type of track being used.

Proper Track Sag TX,90,RR2516 -19-10JAN12-1/1 4-1-18 070813 PN=134