Miscellaneous—Operational Checkout Start Aid Checks T118188B —UN—02NOV98 T118723B —UN—01DEC98 A—Canister Open right rear service door. Check position of canister (A) in holder. Inspect plastic line from top of starting aid to air intake manifold. Press and hold starting aid button down to operate starting aid. OK: Check complete. LOOK: There must NOT be any kinks or breaks in line and ends must be installed securely. NOT OK: Can must click onto solenoid. Check for dot on ether starting aid nozzle in air intake manifold. NOT OK: Replace plastic line. See your authorized dealer. LOOK: Dot must be at the 12 o'clock position on the fitting of air intake manifold. NOT OK:
Adjust fitting so dot is in correct position. HG31779,00000D1 -19-03SEP02-10/57 Water Separator Trap Check T119033B —UN—15DEC98 Open rear right side service access door. Loosen drain knob and drain fuel for several seconds or until water and sediment are removed. OK: Check complete. LOOK: Fuel must flow from drain tube. NOT OK: No flow, remove and clean valve. See your authorized dealer. Tighten drain knob. NOT OK: Replace valve. See your authorized dealer. Continued on next page HG31779,00000D1 -19-03SEP02-11/57 4-2-4 070813 PN=143