John Deere 450H, 550H, 650H — Fuel System Checks

Miscellaneous—Operational Checkout Fan Shroud and Fan Guard Checks T6488GC —UN—23AUG93 Check fan to fan shroud clearance. Inspect fan guard. OK: Check complete. LOOK: Fan must be centered in fan shroud. NOT OK: Adjust fan shroud to center fan. See your authorized dealer. LOOK: Guard must NOT be bent or damaged, all mounting brackets must be intact and all hardware must be tight. NOT OK: Repair or replace guard. Tighten hardware. See your authorized dealer. HG31779,00000D1 -19-03SEP02-7/57 Fan Belt Checks T118314 —UN—01DEC98 A—Tension Adapter Inspect condition of belt. Tension adapter (A) will automatically adjust to belt wear. LOOK: There must NOT be any oil or grease on fan belt or pulley.

LOOK: Inside surface of belt must NOT have any cracks. Check fan belt for tightness. LOOK: Serpentine belt tension stop on swing arm must NOT contact fixed stops on tensioner (A). OK: Check complete. LISTEN: Fan belt must not squeal when engine is stopped. NOT OK: Replace fan belt. See Inspect Serpentine Belt. (Section 3-3.) HG31779,00000D1 -19-03SEP02-8/57 Fuel System Checks Continued on next page HG31779,00000D1 -19-03SEP02-9/57 4-2-3 070813 PN=142