Miscellaneous—Operational Checkout Radiator Outside Air Flow Check (Blower Fan) CAUTION: Prevent possible injury from unexpected machine movement. Keep park lock lever in up (locked) position during this check to prevent movement of unit. Start engine. Run at fast idle. FEEL: Air flow must be brisk and even through radiator. NOTE: It is normal to have less air flow at center of fan. Stop engine. Inspect fins for mud and debris. LOOK: Sides of radiator must be free of mud, leaves, grass, and other debris. OK: Check complete. Inspect radiator for bent or damaged fins. NOT OK: Clean outside of radiator. LOOK: Fins must be straight and not broken or cracked. NOT OK: Straighten fins.
Replace radiator if severely damaged. See your authorized dealer. HG31779,00000D1 -19-03SEP02-4/57 Hose, Clamps, and Water Pump Checks Inspect all radiator and heater hoses for cracks or leaks. Inspect all hose clamps. Inspect water pump for leaks. OK: Check complete. LOOK: Radiator and heater hoses must NOT be brittle, show signs of leaks, or rub on adjacent parts. NOT OK: Replace damaged hoses. See your authorized dealer. LOOK: All hose clamps must be tight and perpendicular to the hose. Crooked clamps can cause damage and leaks. NOT OK: Straighten and tighten clamps. See your authorized dealer. LOOK: Water pump must NOT show signs of leaks. NOT OK: Replace water pump.
See your authorized dealer. HG31779,00000D1 -19-03SEP02-5/57 Fan Checks T6558AN —UN—23AUG93 Remove engine side shield. Inspect fan blades for damage. LOOK: Fan blades must not have any nicks or bends. Check fan for correct installation. OK: Check complete. LOOK: Cupped portion of fan blades must be forward from radiator. NOT OK: If blades are bent, replace fan. If fan blades are nicked, repair. See your authorized dealer. NOTE: If fan is installed backwards, about 50% of its capacity is lost. NOT OK: Remove and reinstall fan. See your authorized dealer. Continued on next page HG31779,00000D1 -19-03SEP02-6/57 4-2-2 070813 PN=141