Miscellaneous—Operational Checkout Transmission Filter Restriction Indicator, Transmission Oil Temperature and Park Brake Indicator Check Key switch "On" to bulb check position. LOOK: Transmission oil filter restriction light, hydraulic oil filter restriction light, transmission oil temperature light, fasten seat belt indicator, and park brake indicator on. Start engine and set at slow idle. LOOK: Transmission oil filter and temperature indicators OFF, park brake indicator on. Lower park brake lever. OK: Check complete. LOOK: Park brake indicator goes OFF. NOT OK: Check bulb in monitor. See your authorized dealer.
HG31779,00000D1 -19-03SEP02-17/57 Transmission Gauge and Charge Pressure Check Start engine and position engine speed control lever at slow idle. LOOK: Needle must be in the green. Slowly increase engine speed to fast idle. LOOK: Needle must gradually rise as speed increases. At fast idle needle must still be in the green with very minimal fluctuation. OK: Check complete. NOTE: Transmission oil filter restriction indicator might stay on until oil reaches operating temperature. NOT OK: See your authorized dealer. HG31779,00000D1 -19-03SEP02-18/57 Park Brake Valve Leakage Check Operate machine for several minutes to heat hydrostatic oil to normal operating temperature.
Position engine speed control at slow idle with park lock lever UP. LOOK: Observe transmission pressure gauge while moving park lock lever to DOWN position. Brake pedal will move to full UP position as park brake lever is lowered. LOOK: Pressure should drop as park lock lever is moved DOWN, then return to original value. Depress brake pedal. OK: Check complete. LOOK: Pressure should drop as brake pedal is released, then return to original value. NOT OK: Isolate park brakes, brake valve to locate leakage. See your authorized dealer. LOOK: Observe tracks for any creep or movement. NOT OK: Tracks move in neutral, see your authorized dealer.
HG31779,00000D1 -19-03SEP02-19/57 Park Brake Operational Check Operate machine slowly in forward. Fully depress park brake pedal and then release. OK: Check complete. CAUTION: Pushing on brake pedal will stop machine abruptly. LOOK: Machine MUST STOP when the pedal is depressed and MUST MOVE when pedal is released. NOT OK: See your authorized dealer. Continued on next page HG31779,00000D1 -19-03SEP02-20/57 4-2-7 070813 PN=146