John Deere 450H, 550H, 650H — Hydraulic System Checks

Miscellaneous—Operational Checkout Neutral Start Switch Check Park lock lever down. Move FNR to NEUTRAL. Apply brakes. Turn key to START position. OK: If machine starts, go to next check. LISTEN: Does machine start? NOT OK: If machine does not start, see your authorized dealer. Park lock lever UP. Move FNR to neutral. Turn key to start position. OK: If machine starts, go to next check. LISTEN: Does machine start? NOT OK: If machine does not start, see your authorized dealer. Pull park lock lever UP. Move FNR to forward or reverse. Turn key to start position. OK: If starting motor does not operate, go to next check. LISTEN: Starting motor MUST NOT operate. NOT OK:

If starting motor operates, see your authorized dealer. Pull park lock lever DOWN. Move FNR to forward or reverse. Turn key to start position. OK: If machine does not start, go to next check. LISTEN: Does machine start? NOT OK: If machine starts, see your authorized dealer. HG31779,00000D1 -19-03SEP02-37/57 Start Circuit Check Park lock lever UP and FNR in NEUTRAL. OK: Go next check. Turn key to “Start” position. NOT OK: Starting motor did not turn. See your authorized dealer. LISTEN: Starting motor must operate. NOT OK: Oil Pressure indicator stays on for more than 3 seconds after start-up. Stop engine and check oil level. See Check Engine Oil Level. (Section 3-4.) LISTEN:

Engine must start. NOT OK: Starting motor turns, but engine does not start. See your authorized dealer. LOOK/LISTEN: During engine cranking, on monitor indicator all monitor functions must be ON and alarm must BEEP. On gauge package, low voltage and engine oil pressure indicators must be ON, fuel gauge needles moves to full and other gauge needles move slightly. NOT OK: See your authorized dealer. HG31779,00000D1 -19-03SEP02-38/57 Hydraulic System Checks Continued on next page HG31779,00000D1 -19-03SEP02-39/57 4-2-12 070813 PN=151