Miscellaneous—Operational Checkout Track Roller Check Have another person operate machine in forward direction. OK: Go to next check. LOOK: All rollers must turn but must NOT "wobble". NOT OK: Repair. See your authorized dealer. HG31779,00000D1 -19-03SEP02-48/57 Accessory Checks HG31779,00000D1 -19-03SEP02-49/57 Seat Control Checks Does seat raise and lower easily? Does seat angle change easily? Does lever unlock easily and then lock to hold seat and consoles in position? Does lever move easily to unlock seat support? Does seat move forward and rearward easily? Does lever lock seat support in position when released? Does seat back tilt forward and rearward easily?
Does lever unlock and lock easily to hold seat back in position? OK: Go to next check. See Adjusting the Seat. (Section 2-1.) NOT OK: Inspect linkage and repair. Go to your authorized dealer. HG31779,00000D1 -19-03SEP02-50/57 Visual Inspection of All Lines and Hoses Engine OFF. Inspect all lines and hoses. Are lines and hoses straight, NOT kinked or worn from rubbing on other machine parts or "weather checked"? Are hose and line connections clean, NOT showing signs of leakage, such as oil or dust accumulation at fittings? OK: Check complete. All hose and line clamps must be in place and tight.
Clamps must have rubber inserts or cushions in place to prevent clamps from crushing or wearing into hoses or lines? NOT OK: Reposition hoses or lines and tighten or replace clamps. Tighten fittings or replace O-rings in fittings. Replace hoses or lines as required. See your authorized dealer. HG31779,00000D1 -19-03SEP02-51/57 Air Conditioner Compressor Check—If Equipped Inspect compressor and belt. LOOK: Is drive belt tight? LOOK: Is belt in good condition, NOT frayed, worn or glazed? LOOK: Are compressor mounting brackets in good condition, and bracket cap screws tight? LOOK: Is belt pulley in good condition, NOT worn or groved? LOOK:
Are electrical connections to compressor clutch clean and tight? Is wiring to compressor in good condition? Turn fan ON to check for interference to shroud due to damaged fan blades. Check wiring harness system for damage or cuts. LISTEN: Is there any noise of fan blades to shroud? OK: Check complete. LOOK: Are air conditioner hoses protected by cordura sleeves in engine compartment next to fan shroud and alternator area? NOT OK: Repair or replace components as required. See your authorized dealer. Continued on next page HG31779,00000D1 -19-03SEP02-52/57 4-2-15 070813 PN=154