John Deere 450H, 550H, 650H — Instrument Panel Functions (Earlier Machines)

Operation—Operator's Station Instrument Panel with Gauge Package—If Equipped (Earlier Machines) T123269 —UN—06AUG99 A—Winch Oil Pressure Indicator—If Equipped (Red) B—Check Service Code Indicator (Clear) C—STOP Indicator (Red) D—Engine Coolant Temperature Indicator (Red) E—Engine Oil Pressure Indicator (Red) F—Transmission Oil Temperature Indicator (Red) G—Hydraulic Oil Filter Restriction Indicator (Yellow) H—Fasten Seat Belt/Park Lock On Indicator (Clear) Transmission Oil Filter Indicator (Yellow) J— Voltage Indicator (Yellow) K—Engine Air Filter Restriction Indicator (Yellow) L—Fuel Gauge M—Engine Oil Pressure Gauge N—Engine Coolant Temperature Gauge O—Transmission Oil Pressure Gauge P—Front and Rear Work Lights Switch Q—Hour Meter (When equipped with optional Transmission Speed Setting Gauge, the hourmeter is located on right side of front cowl) R—Under-Seat Heater ON/OFF Switch S—Transmission Speed Setting Gauge Display (Optional) IMPORTANT:

When the STOP-engine indicator is activated, stop engine immediately and investigate cause of problem. DO NOT start engine until problem has been corrected. When a red indicator lights, an audible alarm will sound. Stop the engine immediately and investigate the cause of the problem. Each display indicator light is color-coded to indicate the severity of the situation. Red is a high-level warning, yellow is a low-level warning and clear indicates a condition. CED,OUO1032,744 -19-06JAN00-1/1 2-1-1 070813 PN=27