John Deere 450H, 550H, 650H — Starting Fluid (Cold Weather Start Aid)—If Equipped

Operation—Operating The Machine 2. Sit in seat and fasten seat belt. TS175 —UN—23AUG88 HG31779,00000BA -19-22JUL02-3/4 NOTE: Controls and switches must be in the positions described, before starting engine. 3. Move FNR lever (C) to N. 4. Park lock lever in up (locked) position (D). IMPORTANT: To avoid engine damage, never start engine with engine speed control at high speed. 5. Engine speed control lever (A) to 1/3 speed. 6. Push horn switch (B) to sound horn. IMPORTANT: Do not operate starter more than 20 seconds at a time or starter may be damaged. If engine does not start, wait at least two minutes before trying again.

If engine does not start in four attempts, refer to Troubleshooting chapter. 7. Turn key switch clockwise to turn engine until it starts. With engine running, adjust engine rpm to 1/2 speed. See Engine Warm-Up in this section. T157847B —UN—22JUL02 A—Engine Speed Control Lever B—Horn C—FNR Lever D—Park Lock Lever T118007B —UN—14JAN99 HG31779,00000BA -19-22JUL02-4/4 2-2-7 070813 PN=45