Operation—Operating The Machine Foot Pedals CAUTION: Prevent possible injury from unexpected machine movement. Pushing on brake pedal will stop machine abruptly. NOTE: Release of brake pedal will allow machine to move. T118042C —UN—02DEC98 Brake pedal (B) should not be used to stop machine during normal operating conditions. Pushing on brake pedal will stop machine abruptly. Travel will resume as pedal is released . Pushing on decelerator pedal (A) will slow engine rpm and reduce machine ground speed. A—Decelerator Pedal B—Brake Pedal CED,TX03768,2696 -19-18FEB00-1/1 Using Park Lock Lever CAUTION: Prevent possible injury from unexpected machine movement.
Always move park lock lever to up (locked) position before starting or dismounting. T118001B —UN—11NOV98 When park lock lever is in up (locked) position (B), FNR lever can move but will not operate the machine. When park lock lever is in down (unlocked) position (A), FNR lever can move machine. If park lock lever is pulled down while the FNR lever is in forward or reverse, the machine will not move. Put FNR lever in neutral, then raise and lower the park lever. Machine is now operable. A—Park Lock Lever Unlocked B—Park Lock Lever Locked T118007C —UN—14JAN99 CED,OUO1032,1070 -19-28OCT98-1/1 Stopping the Machine Move FNR lever to N. Push park lock lever to up (locked) position. NOTE:
Park brake automatically engages when engine is not running. CAUTION: Machine may overturn if blade is dropped when moving rapidly down a steep hill. Stop machine by doing one of the following: Push decelerator pedal. Push brake pedal. As a last resort, drop blade to stop machine. CED,TX03768,2699 -19-09FEB00-1/1 2-2-26 070813 PN=64