John Deere 450H, 550H, 650H — Blade Pitch Operation

Operation—Operating The Machine Parking the Machine 1. Park machine on a level surface. 2. Lower equipment to the ground. 3. Move FNR control lever (1) to N. NOTE: Park brake automatically engages when engine is not running or park lock lever is in up (locked) position. 4. Move park lock lever (3) to up (locked) position. IMPORTANT: To avoid damage to turbocharger (if equipped), run engine at 1/2 speed no load for two minutes. 5. Run engine at 1/2 speed no load for 2 minutes. 6. Move engine speed control lever (2) to slow idle position. 7. Turn key switch to “Off” to stop engine. 8. Remove key from switch. T157847F —UN—29AUG02 9.

Release hydraulic pressure by moving control lever until equipment does not move. 10. Turn battery disconnect switch off. 1— FNR with Transmission Speed-In Grip Lever 2— Engine Speed Control Lever 3— Park Lock Lever T118007D —UN—28AUG02 HG31779,00000BC -19-22JUL02-1/1 2-2-27 070813 PN=65