Operation—Operating The Machine Operating Winch—If Equipped CAUTION: Always be sure rear screen between winch and operating compartment is in place before operating winch. Operate the winch only from operator's station. A coolant heater is recommended with winch option if ambient temperature is below —18°C (0°F). Before operating winch, place winch control in free spool to circulate oil through winch until transmission oil reaches operating temperature. Move lever to FREE SPOOL (A) position so cable can be pulled out freely. Move lever to the BRAKE OFF (B) position so cable can be pulled out with tension. Move lever to the BRAKE ON (C) position to hold cable.
Move lever to POWER IN (D) position to wind cable on drum Move lever to POWER OUT (E) position (if equipped) to unwind cable from drum. T7440BG —UN—20DEC90 A—Free Spool B—Brake Off C—Brake On D—Power In E—Power Out Standard Control Pattern T7440BH —UN—20DEC90 Power In, Power Out Control Pattern TX,36,FF2210 -19-03SEP02-1/1 2-2-31 070813 PN=69