John Deere 450H, 550H, 650H — Fasten Cable to Winch Drum—4000S Series

Operation—Operating The Machine Fasten Cable to Winch Drum—4000S Series To conform with certain state laws, the cable must be attached to the drum so that it can come loose if the cable is unwound from winch drum. Attach cable to winch drum using one of the following methods: CAUTION: Prevent possible personal injury from cutting wire. Wear gloves when you handle cable to protect hands from cable wire cuts. DO NOT guide cable on winch with your hands. IMPORTANT: If a ferruled cable is used, the drum plug (B) MUST be installed to prevent cable from bending cable slot. T7347AS —UN—27SEP90 First Method—Breakaway Anchor: 1. Attach a ferrule or cable clamp (A) to end of cable. 2.

Wrap cable around the drum and slide the ferrule or cable clamp under the cable and into slot in drum and secure with tab (C). A—Ferrule or Cable Clamp B—Drum Plug C—Tab T7382AH —UN—03OCT90 Continued on next page TX,35,RR,798 -19-27JAN00-1/3 2-2-32 070813 PN=70 Maximum Cable Capacities Cable Size Winch Capacity 15.88 mm (0.625 in.) 77.4 m (254 ft) 19.05 mm (0.75 in.) 54.6 m (179 ft) 22.23 mm (0.875 in.) 39.3 m (129 ft)