Operation—Operating The Machine Third Method: IMPORTANT: If you unwind cable below one turn on drum, cable will come off drum. 1. Remove drum plug (B). CAUTION: Prevent possible injury from cable wire. Wear gloves when handling cable to protect hands from cable wire cuts. DO NOT guide cable on winch with your hands. 2. Thread cable up through small hole and insert cable back down through lower hole. Pull loop into drum. 3. Adjust free spool drag to operator's preference. See Winch Free Spool Drag Adjustment in this section. NOTE: Factory free spool drag setting was done without cable; adjust free spool drag to operator's preference when cable is added.
T7347AS —UN—27SEP90 B—Drum Plug T7382AI —UN—03OCT90 TX,35,RR,798 -19-27JAN00-3/3 2-2-34 070813 PN=72