John Deere 450H, 550H, 650H — Loading Machine on a Trailer

Operation—Operating The Machine Winch Free Spool Drag Adjustment The winch drum drag can be adjusted to operator's preference. 1. Start engine. 2. Lower equipment to ground. 3. Engage park brake. 4. Place winch control handle in FREE SPOOL position. 5. Loosen nut (A). 6. Adjust slotted shaft to desired winch drum drag. 7. Tighten nut. T118240B —UN—12NOV98 A—Nut Winch (right side) TX,35,RR4679 -19-10JAN12-1/1 Avoid Track Damage track, avoid water being forced between the plastic pins and rubber plugs while washing machine with pressure washer. IMPORTANT: Avoid machine damage. If machine is equipped with a sealed and lubricated JH91824,00002EA -19-22JUL10-1/1 2-2-35 070813 PN=73