John Deere 450H, 550H, 650H — Transmission and Hydraulic Oil

Maintenance—Machine Diesel Engine Oil Use oil viscosity based on the expected air temperature range during the period between oil changes. 50 C o 122 F o John DeerePlus-50™II oil is preferred. John Deere Plus-50™is also recommended. 40 C o 104 F o SAE 40 Other oils may be used if they meet one or more of the following:

John Deere Torq-Gard™ API Service Category CJ-4 API Service Category CI-4 PLUS API Service Category CI-4 API Service Category CH-4 API Service Category CG-4 API Service Category CF-4 ACEA Oil Sequence E9 ACEA Oil Sequence E7 ACEA Oil Sequence E6 ACEA Oil Sequence E5 ACEA Oil Sequence E4 ACEA Oil Sequence E3 ACEA Oil Sequence E2 SAE-15W-40 SAE 10W-40 30 C o 86 F o SAE 30 SAE 10W-30 20 C o 68 F o SAE 5W-30 SAE 0W-40 10 C o 50 F o 0 C o 32 F o -10 C o 14 F o -20 C o -4 F o TS1687 —UN—18JUL07 -30 C o -22 F o -40 C o -40 F o If oils meeting API CG-4, API CF-4, or ACEA E2 are used, reduce the service interval by 50%.

Oil Viscosities for Air Temperature Ranges If diesel fuel with sulfur content greater than 5000 mg/kg (5000 ppm) is used, reduce the service interval by 50%. Multi-viscosity diesel engine oils are preferred. DO NOT use diesel fuel with sulfur content greater than 10 000 mg/kg (10 000 ppm). Diesel fuel quality and fuel sulfur content must comply with all existing emissions regulations for the area in which the engine operates.

Plus-50 is a trademark of Deere & Company Torq-Gard is a trademark of Deere & Company DX,ENOIL -19-14APR11-1/1 Track Rollers, Front Idler and Carrier Roller Oil John Deere EXTREME-GARD Use oil viscosity based on the expected air temperature range during the period between oil changes. The following oils are recommended: API Service Classification GL-5 gear oil (SAE 80W90) Arctic oils such as (MIL-L-10324A) may be used at temperatures below (–11°F). The following oils are preferred: John Deere GEAR LUBRICANT (SAE 80W90) TX,45,RR5122 -19-14JAN08-1/1 3-1-4 070813 PN=80