John Deere 450H, 550H, 650H — Diesel Engine Oil

Maintenance—Machine Diesel Engine Break-In Oil New engines are filled at the factory with either John Deere Break-In™or John Deere Break-In Plus™ Engine Oil. During the break-in period, add John Deere Break-In™or Break-In Plus ™Engine Oil, respectively, as needed to maintain the specified oil level. API Service Classification CC ACEA Oil Sequence E2 ACEA Oil Sequence E1 IMPORTANT: Do not use Plus-50™II, Plus-50 or engine oils meeting any of the following for the initial break-in of a new or rebuilt engine: Operate the engine under various conditions, particularly heavy loads with minimal idling, to help seat engine components properly.

API CJ-4 ACEA E9 API CI-4 PLUS ACEA E7 If John Deere Break-In Engine Oil is used during the initial operation of a new or rebuilt engine, change the oil and filter at a maximum of 250 hours. API CI-4 ACEA E6 API CH-4 ACEA E5 API CG-4 ACEA E4 If John Deere Break-In Plus Engine Oil is used, change the oil and filter at a minimum of 100 hours and a maximum equal to the interval specified for John Deere Plus-50™II or Plus-50 oil. API CF-4 ACEA E3 API CF-2 API CF After engine overhaul, fill the engine with either John Deere Break-In™or Break-In Plus™Engine Oil. These oils will not allow the engine to break in properly.

If John Deere Break-In or Break-In Plus Engine Oil is not available, use an SAE 10W-30 viscosity grade diesel engine oil meeting one of the following and change the oil and filter at a maximum of 100 hours of operation: API Service Classification CE API Service Classification CD John Deere Break-In Plus™Engine Oil can be used for all John Deere diesel engines at all emission certification levels. After the break-in period, use John Deere Plus-50™ II, John Deere Plus-50, or other diesel engine oil as recommended in this manual. Break-In is a trademark of Deere & Company. Break-In Plus is a trademark of Deere & Company Plus-50 is a trademark of Deere & Company.

DX,ENOIL4 -19-20APR11-1/1 3-1-3 070813 PN=79