Maintenance—Machine Handling and Storing Diesel Fuel CAUTION: Reduce the risk of fire. Handle fuel carefully. DO NOT fill the fuel tank when engine is running. DO NOT smoke while you fill the fuel tank or service the fuel system. When using biodiesel fuel, the fuel filter may require more frequent replacement due to premature plugging. Check engine oil level daily prior to starting engine. A rising oil level may indicate fuel dilution of the engine oil. Fill the fuel tank at the end of each day's operation to prevent water condensation and freezing during cold weather. IMPORTANT: The fuel tank is vented through the filler cap.
If a new filler cap is required, always replace it with an original vented cap. Keep all storage tanks as full as practicable to minimize condensation. When fuel is stored for an extended period or if there is a slow turnover of fuel, add a fuel conditioner to stabilize the fuel and prevent water condensation. Contact your fuel supplier for recommendations. Ensure that all fuel tank caps and covers are installed properly to prevent moisture from entering. Monitor water content of the fuel regularly. DX,FUEL4 -19-14APR11-1/1 Alternative and Synthetic Lubricants Conditions in certain geographical areas may require lubricant recommendations different from those printed in this manual.
Some John Deere brand coolants and lubricants may not be available in your location. Avoid mixing different brands or types of oils. Oil manufacturers blend base stock and additives to create their oils and to meet certain specifications and performance requirements. Mixing different oils can interfere with proper functioning of these formulations and degrade lubricant performance. Synthetic lubricants may be used if they meet the performance requirements as shown in this manual. The temperature limits and service intervals shown in this manual apply to both conventional and synthetic oils. Consult your authorized John Deere dealer to obtain specific information and recommendations.
Re-refined base stock products may be used if the finished lubricant meets the performance requirements. AM40430,00000AA -19-03NOV08-1/1 3-1-2 070813 PN=78