John Deere 450H, 550H, 650H — Check Track Sag

Maintenance—As Required Inspect Serpentine Belt 1. Check belt regularly for wear, especially for cracks at the bottom of grooves and for frayed edges. 2. If necessary, replace belt. 3. Place pipe wrench on top side of adjuster assembly (A). Pull pipe wrench handle down and pull tension adjuster assembly away from belt, releasing belt tension. T118237 —UN—01DEC98 4. Hold tension adjuster assembly away from belt while removing old belt and installing new belt. 5. Slowly release pipe wrench clockwise to place tension adjuster assembly against new belt. Tension is automatically adjusted.

Without Air Conditioning A—Adjuster Assembly T118314 —UN—01DEC98 With Air Conditioning CED,OUO1032,1134 -19-14JAN08-1/1 3-3-1 070813 PN=90