Maintenance—Every 10 Hours or Daily Clean Dust Unloader Valve IMPORTANT: A missing, damaged or hardened dust unloader valve will make engine air screen ineffective, causing very short element life. Valve should suck closed above 1/3 engine speed. It is not necessary to remove engine side shield to clean dust unloader valve. The valve can be accessed through service panel in hood. T117894B —UN—03NOV98 Squeeze dust valve (A) to remove dust from air cleaner. If operating in high dust conditions, clean dust valve every couple of hours of operation to release dust.
Hood and Side Shield Removed for Clarity of Photo A—Dust Valve CED,OUO1032,1032 -19-14JAN08-1/1 Lubricate Dozer Linkage and Blade Socket T118192B —UN—12NOV98 T118190B —UN—12NOV98 Eight Points Four Points T118191B —UN—12NOV98 T158711B —UN—28AUG02 Two Points Two Points Using a grease gun, lubricate each grease fitting until grease escapes at joints. See Grease. (Section 3-1.) CED,OUO1032,1123 -19-02NOV98-1/1 3-4-4 070813 PN=98