John Deere 450H, 550H, 650H — Clean Dust Unloader Valve

Maintenance—Every 10 Hours or Daily Check Hydraulic Oil Level IMPORTANT: DO NOT operate engine without oil in reservoir. 1. Park machine on level surface and lower all equipment to ground. T117862B —UN—26OCT98 2. Turn key switch to 3. The hydraulic oil reservoir, fill port and sight glass are located on the right side of machine. Oil must be between ADD and FULL marks in sight glass tube (A). 4. If necessary, remove cap and add oil to fill port (B). See Transmission and Hydraulic Oil. (Section 3-1.) 5. Check O-ring on cap before installing. A—Sight Glass Tube B—Fill Port T117860B —UN—26OCT98 CED,OUO1032,1029 -19-21OCT98-1/1 Check Transmission Oil Level 1. Park machine on level ground. 2.

Turn key switch to 3. The transmission oil reservoir, fill port and sight glass are located on the left side of the machine. Oil must be within the ADD mark and FULL mark on sight glass tube (A). T117861B —UN—26OCT98 4. If necessary, add oil to fill port (B). See Transmission and Hydraulic Oil. (Section 3-1.) 5. Check O-ring on cap before installing. A—Sight Glass Tube B—Fill Port T117892B —UN—26OCT98 03T,60,K97 -19-20DEC94-1/1 3-4-3 070813 PN=97