. OPERATION OPERATION OPERATION OPERATION 4. When dump lever (3) is moved to the LOWER position, the dump body will start to move down. distance, back on the When the dump body is raised, if the shift lever is at the D position, the transmission is fixed in 2nd. Keep the dump body lowered when traveling. 3 - 99 5. When the dump body has moved down a certain move dump lever released, it will ret will then move do When raising the near the maximu hydraulic circuit or (3) to the FLOAT position. (When t urn to the FLOAT position.) The d wn under its own weight. dump body, let the accelerator p m angle to avoid any impact loa hoist cylinders.
PRECAUTIONS FOR OPERATION When traveling on r oads in rain or snow, or when travel ing on muddy or soft ground, con sider the loaded condition of the machine and be extremely careful not to let the tires slip or the machine spin an d sink into the ground. If the engine should stop when the machine is travelin g, stop the machine immediately , then move the gear shift lever to the N positi on, and start the engine again.
ERGENCY item on the machine monitor should flash and If the central warnin g lamp and pilot lamp for any EM monitor should flash and the buzzer sounds during operation, stop the machin e immediately and investigate th For details, see "TR OUBLESHOOTING (PAGE 3-11 When loading, be c areful to load the dump body unifo rmly, and be particularly careful t o avoid loading too much at the front. On slippery road su rfaces, apply the retarder control l ever slowly and shift the transmi ssion down to preven t the rear wheels from lo cking. When traveling thro ugh pools of water, water may get inside the front brakes and caus e a big drop in the braking force, so drive care fully in such areas.
If water should get into the brakes, apply the b rakes several times while traveling to produc e friction heat between the pad an d disc to remove the water.