. ATTACHMENTS, OPTIONS TACHOGRAPH (TCO 15-6) CHART SUPPORT PRESSING RING NAME PLATE This (20) indicates the type and model. VOLTAGE INDICATION LABEL This label (21) indicates the voltage. 6 - 17 CLOCK SETTING KNO Turn this knob (15) cl ockwise to advance the h and, and counterclockwise to turn the han This (16) is the rotati ng part of the clock and h as teeth t o prevent the This ring (17) is a ring that presses the chart a nd holds i t against the CUTTING KNIFE This knife (18) cuts th e tape connecting the ch INSTRUMENT LIGHTI This lamp (19) is use d for light up the instrume METHOD OF USI NG KEY s of key.
Key (1) with no mark is used for There are three type for opening and locking t he instrument. Key (2) ( marked w ith No . 1) is change key 1, and key (3) (marked with No. 2) is chan ge ke y 2. With these three key operation and the ch s, it is possible to know the details of the ange of operator. To use the change ke y, remove the instrument open/loc k key and insert change key 1 i n the same key hole, then turn 45° i n the No. 1 direction. Use change key 2 in t he same way and turn to the No. 2 direction. The change key will o nly turn in the direction o f its numb The change keys can not be used to open the i nstrumen Recording width of ch When using key with no mark:
1.45 mm (0.057 When using key with No. 1 mark: 2.15 mm (0.0 When using key with No. 2 mark: 0.7 mm (0.0