. SAFETY PRECAUTIONS FOR MAINTENANCE raised in support the NOISE hit with a and safety the metal fly out 2 - 30 HANDLING SUSPENSION CYLINDER The suspension cylinde r is charged with high-pressure ni trogen gas . If any mistake is mad e in handling, it may lead to serious injury. To pr event this, always do as follows. Do not remove or dis Do not bring it near fl Do not make holes in it, weld it, or use a cutting torch Do not bear any sho ck by hammering, rolling or simila r activity. Ask for your Komats u distributor when sealing gas int o the cylinder or r eleasing gas fr PERSONNEL Do not allow any unaut horized personnel into the area w hen servicing the machine .
If ne cessary, emplo y a guard WORK UNDER THE MACH If it is necessary to order to carry out ser securely with blocks weight of the machin vice or maintenance, support the When carrying out ins pection with the dump body raise set the dump lever to then insert the body p pin, see "BODY PIV the HOLD position, and lock it in ivot pin securely. When you use b When carrying out main tenance of the engine and you are exposed to noise for long period s of time, wear e ar covers or ear plugs while work If the noise from the ma chine is too loud, it may cause t emporary or permanent h earing PRECAUTIONS WHEN USI When using a hammer, pins may fly out or metal particle scattered.
This may le ad to serious injury. Always do a If hard metal parts such as pins, or bearings are hammer, there is a h cause serious perso glasses and gloves. azard that pieces might be scatt If pins are hit with a particles may fly out Always make sure th using the hammer. and injure people in the surround at no-one is in the surrounding ar There is a hazard th and injure people in t REPAIR WELDING Welding operations mus t always be carried out by a qualif ied welder an d in a place equippe d with proper e quipment There is a hazard of ga s, fire, or electrocution when carry ing out welding, s o never allow a ny unqualified personne to carry out welding.