Komatsu — No DC Link Voltage

OM3232 8/11 Operator Cab And Controls - Section 32 Page 32-19 Pantograph Energized Indicator light (12, Figure 32-9) will illuminate when the pantograph is fully extended and is receiving power from the electrical lines. Dynamic Retarding Indicator light (15, Figure 32-9) illuminates whenever the retarder pedal is operated or the automatic overspeed retarding circuit is energized, indicating that the dynamic retarding function is operating. Pantograph Up Indicator light (13, Figure 32-9) will illuminate when the pantograph is not fully retracted.

No DC Link Voltage Indicator light (16, Figure 32-9) indicates that the DC link in the control cabinet is not providing voltage to the propulsion system. Service Brake Applied Indicator light (14, Figure 32-9) will illuminate when the service brake pedal is applied. Do not attempt to drive the truck from a stopped position with the service brakes applied, except as noted in Section 30, Operating Instructions - Starting On A Grade With A Loaded Truck.