OM4057 9/11 Lubrication and Service - Section 40 Page 40-9 INITIAL 50 HOUR LUBRICATION AND MAINTENANCE CHECKS *1. *2. *3. * These checks are required only after the initial 50 hours of operation , such as the commissioning of a new truck or after installing a new or rebuilt component. INITIAL 100 HOUR LUBRICATION AND MAINTENANCE CHECKS * 1. * This check is required only after the initial 100 hours of operation , such as the commissioning of a new truck or after installing a new or rebuilt component.
Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS FUEL FILTERS - Change the Stage 1 and Stage 2 fuel filters. Refer to engine Operation & Maintenance manual for specific filter replacement instructions. HYDRAULIC SYSTEM FILTERS - Replace the filter elements. Check the oil level. Add oil as necessary. (Lube Key B) FAN DRIVE ASSEMBLY - Check torque for the six fan mounting cap screws: 237 N·m (175 ft lb).
Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS HYDRAULIC SYSTEM FILTERS - Replace the filter elements. Check the oil level. Add oil as necessary. (Lube Key B)