Komatsu — STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION engine pre-heating pilot after Ambient temperature Pre-heat time 0 ° C to -10 ° C (32 ° F to 14 ° F) 0 to 15 seconds -20 ° C to -30 ° C (-4 ° F to -22 ° F) 30 to 45 seconds -10 ° C to -20 ° C (14 ° F to -4 ° F) 15 to 30 seconds -30 ° C to (-22 ° F to) 45 seconds 10. When the engine starts, release the key in starting switch (2). The key will automatically return to the ON position. REMARK Immediately after starting the engine, run the engine at idling, and do not operate the accelerator pedal or work equipment during this time. Guideline for idling time Cold weather:

At least 15 seconds When first starting engine after changing oil or replacing engine oil filter: 20 seconds 3 - 113 8. Keep his goes out. (Pre-heating completed lamp goe s out.) amp (3) approx. 12 econds, and the 9. When engine pre-heating pilot lamp (3) goes off, turn the key of starting switch (2) to the START position to cran k the engine. The time tha t engine pre-heating pilo t lamp ( 3) s tays on changes according to t he a mbient temperatur eas shown in the table below.