. MAINTENANCE SERVICE PROCEDURE REMARK If the filters cannot be cleaned with air or in water, replace them with new ones. 4 - 38 CLEAN AIR CONDITIONER AIR FILTER (FRESH/RECIRC FILTER ) Clean the air conditioner a ir filter if it becomes clogged or if there is dirt or oil stuck to it. r (1) and remove fresh air filter (2). r (3) at the rear of the cab. o clean filters (2) and (3). 1. Open inspection cove 2. Remove RECIRC filte 3. Use compressed air t If there is any oil stuc it in water containing After washing with w again. 1. Open inspection cove r (1) and remove fresh air filter 2. Remove RECIRC filte 3. Use compressed air t k to the filter or it is extremely dirty, wash a neutral agent.
ater, dry the filter thoroughly and use it REPLACE AIR CONDITIO NER BELT 1. Loosen 3 bolts (1) an to the side. 2. Replace the V-belt. When adjusting th directly with a bar. Tighten adjust nut V-belt. The standa to 22 mm (0.71 to 0 (approx. 58.8 N {6 compressor pulley 1. Loosen 3 bolts (1) an d lock nut (2), then move compressor (3) e V-belt, do not push the compressor Use adjust nut (4). (4) and bolts (1), and apply tens ion to t he rd deflection for the V-belt is a pprox. 18 .88 in) when the belt is pushed by thumb kg}) at a point midway between the air and fan pulley.
air CLEAN AND CHECK HYD RAULIC COOLER FINS If the hydraulic cooler fins are clogged or there is dirt cau ght in t he fins, clean and check the fins. over on the right. 1. Open the inspection c 2. Use compressed air clogging the hydraulic instead of compresse 1. Open the inspection c to remove the mud, dirt, an cooler fins. Steam or water ma d leaves y be used d air. REMARK Check the hydraulic coole r hoses. If any hose is cracked or hardened by age, replace with a new hose. Also check and tighten all loose hose clamps.