. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN DAMPER CASE, ADD OIL If the oil is below the L mark, add oil through the dipstick insertion port. REMARK 4 - 55 1. Open the engine sid e cover on t he right side o f the ma chine. 2. Remove dipstick (G) and wipe t he oil off with a cloth. 3. 4. Fully inse The oil sh rt dipstick ( ould be be G) into filler tween the H pipe (F) and L m , then arks remove on dipsti 5.
If the oil is above the H mark, op en inspection cover (2 ) in the center of the bottom face of th e power train case, dr ain the excess oi l from engi ne damper d rain plug (P) (t his can b e seen towards t he front of t he machine from th e inspection wi ndow), then chec k the oil le Check the oil level w hile the engi ne is stopped I f the ma chine is in position before checking t he oil level