Komatsu — EFFECTIVE USE OF MODE SELECTION SYSTEM

. ATTACHMENTS, OPTIONS SHOE SLIP CONTROL When using shoe slip control, the travel speed for bedrock setting modes [1] - [5] is set at approx. 70 - 90% of the full travel speed. When traveling on bedrock, if it is felt that the travel speed when 6 - 18 REVERSE SLO W MODE he travel speed when traveling in reverse, reduces of operating the decelerator pedal, and improves the for the operator. es that can be used: R1, 2, 3 s only necessary when traveling in R2 or R3, it is ange the setting of the service mode. To do this, your Komatsu distributor.) operations:

Traveling on bedrock, traveling down to reduce the travel speed when traveling in R1, R2, erse slow mode is ON, the travel speed is set to f the full travel speed. to reduce the travel speed when traveling in reverse after ripping and dozing bedrock or when This reduces t he travel speed w hen traveling in reverse, r educes the frequency of operating the de celerato r pedal, and impro ves the riding comfort for the operator. Speed rang (If this mode i es that can be use s only necessary d: R1, 2 when tr possible to ch please contact ange the setting your Komatsu di of the se stributor. Applicable steep hills bedrock Use this mode to reduce the trav el speed when tr aveling in R1, R2, or R3.

When the rev approx. 80% o f the full travel sp Use this mode to reduce the tr traveling in rev erse after dozing on steep slopes . The trav el speed differs in each mode according to whether it is used in combi nation with the ec onomy m ode or with shoe traveling in rev erse is too high, t urn the r everse slow mod This will reduc e the travel speed when tr aveling in reverse When travelin g down slopes, if it is felt th at the tr avel spee d when traveling in rev erse is too high, t urn the r everse slow mod e ON. . This will reduc e the travel speed when tr aveling in reverse