Komatsu — PRECAUTIONS WHEN TRAVELING

. SAFETY PRECAUTIONS FOR OPERATION PRECAUTIONS WHEN TRAVELING over a safe avoid 2 - 20 Never turn the e stops wh en the machine is tra veling. When the engine is off, it is impossi ble to operate the steering. Apply the brakes an d stop the machine i mmediately, if the engine stops. When travelin g on flat ground, keep the work equipment 40 to 50 cm (16 to 20 in) high above the ground When travelin g on rough ground, travel at low speed and operate the st eering suddenly. There is danger that the ma may turn over . The work equipment may hit the ground s and cause the machine to lose its balance, or may dama machine or st Avoid travelin g over obstacles when possible.

If the ma has to travel o ver an obstacle, keep the work equipment to the groun d and travel at low speed. Never travel obstacles whi ch make the machine tilt strongly to one sid When travelin g or carrying out operations, always keep distance from people, structures, or other machines to ontact with them. coming into c When passing over bridges or structures, check first that the structure is strong enough to sup port the wei ght of the machine. When traveling on public roads, check first w ith the relevant authorities and follow their instructions.

When operati ng in tunnels, under bridges, under electric w ires, or other places where the height is limited, o perate slowly and be extremely careful not to let the machine bo dy or work equipment hit anything. Do not approa ch the edge of a cliff carelessly. When dro pping soil over a cliff for banking or r eclamation, leave soil of one sc oop at the edge of the cliff and push it with t he next scoop. When the mac hine passes over the top of a hill or when a lo ad is dumped over a cliff, the load is s uddenly red uced, and there is d anger that the travel speed rises suddenly. To prevent this, lower the travel spe ed.

If the machine moves with only either side of the blade lo aded, its tail may swing. Take care.