(26) (26) Important Important Fit the gearwheel (rotor) and cardan shaft so that a tooth base in the rotor is positioned in relation to the shaft slot as shown. Turn the gear rim so that the seven through holes match the holes in the housing. (780-3A) 5-83(3) Fit the spacer, if any. (27) (780-3A) 5-83(4) Place the end cover in position. (28) Fit the special screw with washer and place it in the hole shown. (29) (780-3A) 5-84(2) 5-43 (780-3A) 5-84(1)