Fit the six screws with washers and insert them. Cross-tighten all the screws and the rolled pin. В Tightening torque : 3.1 Ь 0.6 kgf В m (30) (22.4 Ь 4.3 lbf В ft ) (780-3A) 5-84(3) Place the dust seal ring in the housing. (31) (780-3A) 5-84(4) Fit the dust seal ring in the housing using special tool and a plastic hammer. (32) (780-3A) 5-85(1) (33) Press the plastic plugs into the connection ports. Do not use a hammer! ц (780-3A) 5-85(2) 5-44