Service Manual for WD10 Diesel Engine (2) Exhaust pipe bolts should be applied with molybdenum disulfide, recommended tightening torque for exhaust pipe fixing bolts is 65~80Nm. Exhaust pipe bolts cannot be reused more than twice. 464 Disassembly, Inspection, Maintenance and Assembly of Turbocharger System 4641 Exploded View of Turbocharger System Stud Lock nut 2-type all-metal hexagon nut Turbocharger Stud Turbocharger gasket Fig. 4-53 Exploded view of turbocharger system 4642 Steps to Disassemble Turbocharger System Disassembling steps are contrary to assembling ones.
4643 Inspection and Maintenance of Turbocharger System (1) Check service behavior of rotor Stir compressor impeller gently with your finger, it is normal if the impeller can rotate for more than one round; if the impeller stopped soon, then it means the bearing is abnormally worn, or there is clash or jamming problem between rotating parts and fixed parts, you must find out the cause and eliminate the problem. (2) Rotor axial movement checking 90