Service Manual for WD10 Diesel Engine (3) Remove generator poly V-belt (8PK) (4) Screw off draw-bolt block bolt, remove the block Draw-in block (5) Remove generator M10 studs (6) Assembling steps are contrary to disassembling ones ATTENTION: The disassembly of generator should be performed by professional personnel. Check whether all insulating pads and sleeves are intact when assembling, damaged parts must be replaced! No short circuit to generator positive and generator housing, otherwise severe accidents may occur. 41123 Inspection and Maintenance of Generator (1) Generator fault diagnosis flow When a failure happens to the engine, firstly you should check whether it is generator failure.
Instrument: test lamp. Flow chart is shown in Fig. 4-85. 123