Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine Check whether there is manufacturing defect, usage defect or damage on cylinder cover shield gaskets and cylinder cover before assembling. (2) Clean up cylinder cover upper surface and assemble cylinder cover shield gaskets orderly. (3) Clean up cylinder cover shields and install them on cylinder cover orderly. (4) Install cylinder cover shield bolts and tighten them. 423 Disassembly, Inspection, Maintenance and Assembly of Water Outlet Pipe 4231 Exploded View of Cylinder Cover Intake pipe gasket Water outlet pipe Water outlet pipe bolt Fixing bolt of high pressure fuel pipe clamp Fig.

4-4 Exploded view of water outlet pipe 4232 Steps to Disassemble Water Outlet Pipe (1) Disconnect sensor wiring harness from water outlet pipe; (2) Remove intake pipe, refer to 46 Intake and Exhaust System for details; (3) Screw off the fixing bolt of high pressure fuel pipe clamp; (4) Remove water outlet pipe fixing bolts orderly, take down the pipe; (5) Water outlet pipe gasket and intake pipe gasket for WP10 two-valve type engine are designed as a whole, take it down after step (4). As shown in Fig. 4-4. 39