Service Manual for WD10 Diesel Engine 4233 Inspection and Maintenance of Water Pipe (1) Check whether there is water leakage trace on the pipe before disassembling; check the pipe for damage like crack and corrosion, a cracked pipe should be replaced, for corrosion that may affect reliability of the pipe, the cause should be analyzed and corroded pipe should be replaced. (2) If there is water leakage in pipe joint, try to replace the joint with new one and tighten it, and check whether the problem is still exist; if connecting thread is damaged, then the pipe should be replaced.
4234 Steps to Assemble Water Outlet Pipe (1) It is recommended to take intake pipe gasket as disposable part and replace it during maintenance; (2) Clean up water outlet pipe joint surface and install it on cylinder cover, fasten the pipe with bolts; (3) Tighten the fastening bolts; (4) Tighten the fixing bolt of high pressure fuel pipe clamp; (5) Install intake pipe, refer to 46 Intake and Exhaust System for details; (6) Connect sensor wiring harness to water outlet pipe; 40