Cummins — HG130, HG170 Engine Manual

www.changlin.com.cn NOTE: Use new seals and sealing washers. Assemble the drain line and fuel drain manifold in the reverse order of removal. Torque Value: (Banjo fitting screw) 15 N• m [11 ft-lb] (Banjo fitting) 9 N• m [7 ft-lb] (Clamp screw) 24N• m [18 ft-lb] Injection Pump Supply Line‐Replacement 17 mm Remove the bleed screw banjo fitting. 14 mm, 16 mm, 17 mm Remove the supply line (Bosch Injection Pump). Replace the seals (1) in the fittings if the line is disassembled. 14,16,19 and 24 mm The Lucas CAV pump has two fittings for the supply line. Replace the seals in the fittings if the line is disassembled.

Replace banjo fitting sealing washers (1) and ferrules (2) each time they are removed. Torque Value: 32 N*m [24 ft-lb] 103 / 167 pages