www.changlin.com.cn Remove the injector hold-down nut and apply a coat of anti-seize compound to injector surface (A). Avoid getting anti-seize compound in the fuel drain hole (B). Install the hold-down nut on the injector body. Install a new o-ring into the recessed groove on the top of the hold-down nut. Make sure the o-ring is not cut or wisted when installing (BOSCH and Stanadyne). CAV injectors retain the o-ring inside the hold-down nut. Apply a coat of anti-seize compound to the threads of the injector hold-down nut. 105 / 167 pages