Cummins — HG130, HG170 Engine Manual

www.changlin.com.cn Disengage the engine timing pin. 24 mm Remove the fuel pump timing pin plug. Reverse the position of the pin and install the pin, plug, and sealing washer. Torque Value: 15 N • m [11 ft-lb] 22 mm or 27 mm Tighten the fuel pump drive nut. Torque Value: P7100 Pump, 165 N>m [122 ft-lb] Install the gear cover access cap hand tight. 10 mm Install the fuel pump mounting bracket capscrews finger tight. To make sure the alignment is correct, tighten the support mounting capscrews. Torque Value: 24 N • m [18 ft-lb] 131 / 167 pages