www.changlin.com.cn Position the turbocharger drain hose to connect the drain tubes; tighten the clamps. 13 mm. Punch, Hammer If loosened, tighten the turbine housing capscrews. Bend the lockplates onto the flats to prevent loosening. Torque Value: 11.3 N • m [8 ft-lb] 10 mm If required, loosen the compressor housing and position the housing to align with the crossover tube. Torque Value: 5.7 N*m [50 in-lb] 11 mm, plastic Hammer Tighten the band clamp to 5.7 N • m [50 in-lb]. Tap around the clamp with a plastic hammer and tighten again to 5.7 N • m [50 in-lb]. 143 / 167 pages