www.changlin.com.cn Fuel Recommendations / Specifications For a more detailed description of fuel properties, refer to Fuel For Cummins Engines. Bulletin NO. 3379001. The following chart lists acceptable alternate fuels for MidRange engines. 158 / 167 pages Warning: Do not mix gasoline or alcohol with diesel fuel. This mixture can cause an explosion. b i Caution: Due to the precise tolerances of diesel injection systems, it is extremely important that the fuel e kept clean and free of dirt or water. Dirt or water in the system can cause severe damage to both the njection pump and the injection nozzles. ( a n S A “ f T a Caution:
Do NOT use diesel fuel blended with lube oil in engines equipped with a catalytic convertor including all model year 1994 and beyond). Damage to legally required emission control may result. Use ASTM No. 2 D fuel with a minimum Cetane number of 40. No. 2 diesel fuel gives the best economy nd performance under most operating conditions. Fuels with Cetane numbers higher than 40 may be eeded in high altitudes or extremely low ambient temperatures to prevent misfires and excessive moke. t operating temperatures below 0 ° C [32° FI, use a blend Of No. IDandNo. 2D fuels, also known as winterized” No. 2D. NOTE: No. 1 D fuel can be used, however, fuel economy will suffer.
Use low sulfur content fuel having a cloud point that is at least 10 degrees below the lowest expected uel temperature. Cloud point is the temperature at which was crystals begin to form in diesel fuel. he viscosity of the fuel must be kept above 1.3 centistokes to provide adequate fuel system lubrication t 40 °C [104° F].