Cummins — HG130, HG170 Engine Manual

www.changlin.com.cn Acceptable Alternate Fuels-Component Wear/Durability OK ONLY if 5% new lube oil is blended with these fuels to increase the lubricity to acceptable level. Caution: Do NOT use diesel fuel blended with lube oil in engines equipped with a catalytic convertor (including all model year 1994 and beyond). Damage to legally required emission control may result. NOTE: Any adjustment to compensate for reduced performance with a fuel system using alternate fuel is not warrantable. NOTE: Wear on any mid-ranged fuel pump component attributed to the lack of lubrication in the fuel is not a warrantable repair.

Lubricating Oil Recommendations / Specifications Oil Performance Recommendations The use of quality engine lubricating oils combined with appropriate oil drain and filter change intervals are critical factors in maintaining engine performance and durability. Cummins Engine Company, Inc. recommends the use of a high quality SAE 15W-40 heavy duty engine oil (such as Cummins Premium Blue) which meets the American Petroleum Instilute (API) performance classification CE/SG. NOTE: CC / CD or CD / SF engine oils can be used in areas where CE oil is not yet available, but the oil change interval must be reduced to one half the interval given in the maintenance schedule.

A sulfated ash limit of 1.0 mass percent is suggested for optimum valve and piston deposit and oil consumption control. The sulfated ash must not exceed 1.85 mass percent. 159 / 167 pages F uel Bosch Nippondenso Stanadyne Lucas CAV T ype A P7100 VE Ep- 9 DB-4 DPA DPS NO. 1-D Diese l OK OK OK OK OK OK OK NO. 2 Fuel Oil OK OK OK OK OK OK OK NO. 1-K Kerosene OK OK OK * * * NO. 2-K Kerosene OK OK OK * * * et-A OK OK OK * * * et A-1 OK OK OK * * * P-5 OK OK OK * * * P-8 OK OK OK * * * et-B N ot ok Not ok Not ok Not ok Not ok Not ok Not ok P-4 N ot ok Not ok Not ok Not ok Not ok Not ok Not ok Cite N ot ok Not ok Not ok Not ok Not ok Not ok Not ok